CARBON LAB Protecting Spray

The high-performance protection with long-lasting effectiveness for all materials. The Protecting Spray forms an invisible, breathable and resistant protective shield on all surfaces. Protects safely against moisture & dirt.

Spray PROTECTING SPRAY onto the cleaned material surface at a distance of approx. 30 cm. Allow to dry and repeat process. Refresh protection after 12-15 times of use.

Warnings: DANGER Caution! Absolutely observe! Damage to health possible by inhalation! Use only outdoors or with good ventilation! Spray only for a few seconds! Spray large areas of leather and textile products outdoors only and allow to flash off well! Keep away from children! Extremely flammable aerosol. Pressurized container: May burst if heated. Causes skin irritation. May cause drowsiness and dizziness. Harmful to aquatic organisms, with long lasting effects. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperatures above 50°C. Avoid inhalation of vapor/aerosol. Use only outdoors or in well-ventilated areas. If you feel unwell, call a POISON CENTER/doctor. If skin irritation occurs: Get medical advice/attention. If medical advice is needed, have container or label at hand. Dispose of contents/container in accordance with local regulations. Keep out of the reach of children. Contains: Hydrocarbons, C11-12, isoalkanes, < 2% aromatics; Hydrocarbons, C6-7, n-alkanes, isoalkanes, cyclic, < 5% n-hexane.

Ingredients: not required

Data DetVO: not required